DocumentDetector v7 or below (Deprecated)

Supported documents

Currently, the documents supported on iOS are:

Document.RG_FRONT, // front of the ID, where the picture is
Document.RG_BACK, // back of the ID, where the data is
Document.RG_FULL, // open ID, showing both the front and the back
Document.CNH_FRONT, // the front of the CNH, where the picture is
Document.CNH_BACK, // the back of the CNH, where the signature is
Document.CNH_FULL, // open CNH, showing both the front and the back
Document.CRLV, // CRLV
Document.RNE_FRONT, // the front of the RNE and RNM, the part with the data
Document.RNE_BACK, // back of the RNE and RNM, the part with the picture
Document.PASSPORT, // Passport
Document.CTPS_FRONT, // front of the CTPS
Document.CTPS_BACK, // Back of the CTPS
Document.OTHERS, // other identification documents in general, such as RNE, Military ID, OAB, and CRLV
Document.ANY; // allows sending any capture

Required permissions

In the info.plist file, add the permissions below:

Permission	Reason	Required?
Privacy - Camera Usage Description	To capture the document photo(s)	No, only required in camera capture stream
Privacy - Photo Library Usage Description	To perform the gallery opening.	No, required only in the upload stream

NSPhotoLibraryUsageDescription

Utilization

First, instantiate an object of type DocumentDetectorSdk:

let documentDetector = DocumentDetectorSdk.Builder(mobileToken: "mobileToken")
    // see table bellow
    .build()

DocumentDetectorSdk.Builder

Parameter	Required?
String mobileToken Usage token associated with your CAF account	Yes
.setDocumentDetectorFlow(flow :[DocumentDetectorStep]) Sets the document capture flow, as explained here	Yes
.setPeopleId(peopleId: String?) Identifier of the user for the purpose of identifying a fraudulent profile	No, only used for analytics
.setAnalyticsSettings(useAnalytics: Bool) Enables/disables data collection for analytics	No, the default is true
.setPopupSettings(show: Bool) Change the setting of the inflated popups before each document	No, the default is true
.setDetectionSettings(detectionThreshold : Float) Changes the default document detection setting, the frame confidence threshold (from 0.0 to 1.0, where 1.0 indicates that the SDK will only accept the document with a perfect frame)	No. The default is 0.91
.setQualitySettings(verifyQuality: Bool, qualityThreshold: Double?) Changes the default setting for verifying the quality of the captures, indicating whether you want to perform this verification (takes about 2 seconds) and the quality threshold for these photos can be set (value from 1.0 to 5.0). In addition, the SDK will return the URL of the image in the variable DocumentDetectorResult.Capture.ImageUrl. Be careful, if you decide to check the quality in this parameter and there is a connection failure while sending the images, the SDK will terminate with an internet error.	No. The default is true and 1.8, respectively
.setLayout(layout: DocumentDetectorLayout) Changes the document masks from success, failure, and normal. It also allows you to change the sound and cancel buttons at the top of the screen. See the example.	No
.setColorTheme(color: UIColor) Change the color of the sound and cancel buttons that are at the top of the screen. Also change the color of the popup buttons, inflated before each document.	No
.enableSound(enableSound: Bool) Enables/disables sounds and the sound icon in the SDK	No, the default is true
.showStepLabel(show: Bool) Show/hide the lower middle label (which contains the document name)	No, the default is true
.showStatusLabel(show: Bool) Show/hide the central label (which contains the status)	No, the default is true
.setNetworkSettings(requestTimeout:TimeInterval) Change the default network settings	No. The default is 60 (seconds)
.setLuminositySensorSettings(luminosityThreshold :Float?) Defines threshold between acceptable/unacceptable ambient brightness. The threshold of this sensor is a number ranging from negative to positive.	No. The default setting is -3.
.setOrientationSensorSettings(orientationThreshold: Double?) Defines threshold between correct/incorrect device orientation. Higher the value more flexible it will be. The threshold of this sensor is the acceleration of the device	No. The default setting is 0.3.
.setStabilitySensorSettings(stabilityThreshold: Double?) Changes the default settings of the stability sensor. The threshold of this sensor is in the range of the last two accelerations collected from the device.	No. The default setting is 0.3.
.setProxySettings(proxySettings: ProxySettings?) Sets the proxy settings, as explained here	No. The default is null
.showPreview(_ show: Bool, title: String?, subtitle: String?, confirmLabel: String?, retryLabel: String?) Enables/disables the capture preview. If show has true, after each capture, the SDK provides a screen for the user to approve or make the capture again. For the remaining parameters, enter nil to use the default value or a String for a custom text.	No. The default is false
.setMessageSettings(waitMessage: String?, fitTheDocumentMessage: String?, verifyingQualityMessage: String?, lowQualityDocumentMessage: String?, uploadingImageMessage: String?, popupDocumentSubtitleMessage: String?, unsupportedDocumentMessage: String?, wrongDocumentMessage_RG_FRONT: String?, wrongDocumentMessage_RG_BACK: String?, wrongDocumentMessage_RG_FULL: String?, wrongDocumentMessage_CNH_FRONT: String?, wrongDocumentMessage_CNH_BACK: String?, wrongDocumentMessage_CNH_FULL: String?, wrongDocumentMessage_CRLV: String?, wrongDocumentMessage_RNE_FRONT: String?, wrongDocumentMessage_RNE_BACK: String?, sensorLuminosityMessage: String?, sensorOrientationMessage: String?, sensorStabilityMessage: String?) Allows customizing messages displayed in the "status" balloon during the capture and analysis process. example	No.
.setCompressSettings(compressionQuality: CGFloat) Allows you to set the quality in the compression process. By default, all captures are compressed. The method expects values between 0 and 1.0 as parameters, 1.0 being the best quality compression (recommended).	No. The default is 1.0
.setManualCaptureSettings(enable: Bool, time: TimeInterval) Enables/disables manual capture. The time parameter sets the time for the capture mode to be enabled.	No. The default is disabled
.enableMultiLanguage(_ enable: Bool) Enables/disables multi-language support.	No. The default is enabled
.setGetImageUrlExpireTime(expireTime: String) Sets how long the image URL will last on the server until it is expired. Expect to receive a time interval between "30m" to "30d". Examples: setGetImageUrlExpireTime("30m"): To set minutes only setGetImageUrlExpireTime("24h"): To set only hour(s) setGetImageUrlExpireTime("1h 10m"): To set hour(s) and minute(s) setGetImageUrlExpireTime("10d"): To set day(s)	No. The default is 3h
.setMask(type: MaskType) Sets the type of mask used in the captures. There are three types: .standard, with the dotted pattern in the document format; .empty, which removes the mask entirely.	No. The default is .standard
.setCurrentStepDoneDelay(currentStepDoneDelay: TimeInterval) Delay the activity after the completion of each step. This method can be used to display a success message on the screen itself after the capture, for example.	No. The default is false
.setUploadSettings(UploadSettings uploadSettings) Sets the settings for uploading documents. By enabling this option, the SDK flow will prompt the user to upload the document files instead of capturing them with the device's camera. This option also includes document quality checks. example of implementation.	No. By default this option is disabled.
.setResolutionSettings(resolution: Resolution) Allows you to set the capture resolution. The method takes a parameter a Resolution, which has the following options: low Specifies appropriate capture settings for output video and audio bit rates suitable for 3G sharing medium Specifies the appropriate capture settings for the output video and audio bitrates suitable for sharing over WiFi high Specifies appropriate capture settings for high-quality video and audio output photo Specifies appropriate capture settings for high-resolution photo quality output inputPriority Specifies appropriate capture settings for high-resolution photo quality output hd1280x720 Specifies the appropriate capture settings for video output at 720p quality (1280 x 720 pixels) hd1920x1080 Capture settings suitable for 1080p (1920 x 1080 pixels) quality video output hd4K3840x2160 Capture settings suitable for 2160p (3840 x 2160 pixels) quality video output	No. The default is hd1920x1080
.setAllowedPassportCountriesList(passportList: [CountryCodes]) Enables the option to allow passports from only a certain issuing country, or, a list of countries. See the complete list at: ISO 3166-1 alpha-3 Example: .setAllowedPassportList(passportList: [CountryCodes.BRA])	No. Passports issued by any country are accepted by default.

DocumentDetectorStep

To create a capture flow, you will need to create an array of DocumentDetectorStep, where each element will be a capture step. To construct each DocumentDetectorStep object, you can enter the following elements:

Parameter	Required?
document: Document Identifies which document you want to capture in the respective step	Yes
stepLabel: String? Text to be displayed at the bottom of the layout	No. There is a pattern per Document Type
illustration: UIImage? Illustration to be shown in the popup before the capture	No. There is a pattern per Document Type
audio: URL? Audio to be played at the beginning of the step. Example.	No. There is a pattern per Document Type

MessageSettings

Attribute	Default Value
waitMessage: String Message displayed when SDK is in the process of opening.	"Please Wait…"
fitTheDocumentMessage: String Message advising to fit the document to the mask.	"Fit the document on the markup"
verifyingQualityMessage: String Message displayed when the SDK makes a request to the backend, verifying quality.	"Checking Quality…"
lowQualityDocumentMessage: String Message displayed when the quality of the capture fails.	"Ops, could not read the information. Please try again"
uploadingImageMessage: String Message displayed when there is no quality check and the capture is being saved on the servers.	"Sending Image…"
popupDocumentSubtitleMessage: String Text displayed in the step initialization popup.	"Dispose the document in a desk, centralize it on the markup and hold the automatic capture."
unsupportedDocumentMessage: String Message displayed when a unexpected type of document is displayed for capture.	"Ops, it seems that this document is not supported. Contact us!"
wrongDocumentMessage_RG_FRONT: String Message displayed when the front of the RG(Brazilian ID card) is displayed in a different flow than expected.	"Ops, this is the RG's Front"
wrongDocumentMessage_RG_BACK: String Message displayed when the RG(Brazilian ID card) version is displayed in a different flow than expected.	"Ops, this is the RG's Back"
wrongDocumentMessage_RG_FULL: String Message displayed when the open RG(Brazilian ID card) is displayed in a different stream than expected.	"Ops, this is the RG Opened"
wrongDocumentMessage_CNH_FRONT: String Message displayed when the front of the CNH(Brazilian driver's license) is displayed in a different stream than expected.	"Ops, this is the CNH's Front"
wrongDocumentMessage_CNH_BACK: String Message displayed when the version of the CNH(Brazilian driver's license) is displayed in a different stream than expected.	"Ops, this is the CNH's Back"
wrongDocumentMessage_CNH_FULL: String Message displayed when the open CNH(Brazilian driver's license) is displayed in a different stream than expected.	"Ops, this is the CNH Opened"
wrongDocumentMessage_CRLV: String Message displayed when the CRLV(Brazilian Vehicle Registration and Licensing Certificate) is displayed in a different stream than expected.	"Ops, this is the CRLV"
wrongDocumentMessage_RNE_FRONT: String Message displayed when the front of the RNE(National Registry of Foreigners) is displayed in a different stream than expected.	"Ops, this is the RNE's Front"
wrongDocumentMessage_RNE_BACK: String Message displayed when the back of the RNE(National Registry of Foreigners) is displayed in a different stream than expected.	"Ops, this is the RNE's Back"
sensorLuminosityMessage: String Message displayed when the brightness threshold is lower than expected.	"Area near you is too dark"
sensorOrientationMessage: String Message displayed when the orientation threshold is lower than expected.	"The device is not on the horizontal"
sensorStabilityMessage: String Message displayed when the orientation threshold is lower than expected.	"Keep the device still"

UploadSettings

To activate the document upload functionality it is necessary to instantiate an object of type UploadSettings() and set its parameters:

Parameter	Required?
enable Enables/disables this feature.	No. The default is true
compress Enables/disables file compression before uploading.	No. The default is true
fileFormats Defines the file format(s) that will be accepted for upload.	No. By default .PDF , .JPEG and .PNG are accepted
maximumFileSize Sets the maximum KB limit of the file to upload.	No. The default limit is 10000 KB (10MB).

Currently, the supported file formats are:

public enum FileFormat: String {
    case png
    case jpeg
    case pdf
}

Getting the result

To get the result, you must implement the DocumentDetectorControllerDelegate delegate in your controller:

class YouController: UIViewController, DocumentDetectorControllerDelegate{
    
    // MARK: - Document Detection Delegates
    
    func documentDetectionController(_ scanner: DocumentDetectorController, didFinishWithResults results: DocumentDetectorResult) {
        //Called when the process was successfully executed
        //The result variable contains the data obtained
    }
    
    func documentDetectionControllerDidCancel(_ scanner: DocumentDetectorController) {
        // Called when the user cancel
    }
    
    func documentDetectionController(_ scanner: DocumentDetectorController, didFailWithError error: DocumentDetectorFailure) {
        //Called when the process terminate with an error
        //The error variable contains info about error
    }
}

After creating the DocumentDetector object, start the DocumentDetectorController by passing this object as a parameter in the constructor:

let scannerVC = DocumentDetectorController(documentDetector: documentDetector)
scannerVC.documentDetectorDelegate = self
present(scannerVC, animated: true, completion: nil)

DocumentDetectorResult

Parameter	Can it be null?
captures:[Capture] The array with the respective captures of the parameterized documents	Yes, in case of error
type: String The class of the read document stream. This parameter is useful in an integration with our OCR route. The existing types are: ["blank", "cnh", "cnh_new", "generic", "rg", "rg_new", "rne", "rnm", "ctps", "passport, crlv, crlv_new"]	Yes, in case of error
trackingId: String? Identifier of this run on our servers. If possible, save this field and send it along to our API. This way we will have more data about how the user behaved during the execution	Yes, if the user sets useAnalytics = false or the analytics calls do not work

Capture

Parameter	Can it be null?
image: UIImage Document image	No
imageUrl :String URL of the document on CAF's server. If you want this URL, keep enabled the parameter that checks the image quality	Yes, if you choose not to check the image quality
scannedLabel :String Label of the respective document within the following possibilities: ["blank", "cnh_back", "cnh_front", "cnh_full", "new_cnh_back", "new_cnh_front", "new_cnh_full", "crlv", "crlv_new", "generic", "rg_back", "rg_front", "rg_full", "rg_new_back", "rg_new_front", "rg_new_full", "rne_back", "rne_front", "rnm_back", "rnm_front", "ctps_back", "ctps_front", "passport"]	No
quality :Double Quality inferred by the document quality algorithm, when enabled. Varies between 1.0 and 5.0	May be 0, if the SDK does not check for quality
lensFacing: Int Defines the face of the camera that was used. Use DocumentDetectorResult.LENS_FACING_FRONT or DocumentDetectorResult.LENS_FACING_FRONT to validate.	No

DocumentDetectorFailure

Superclass that leads to the SDK shutdown. To find out what the reason was, find out which object class has the **isKindOfClass() ** method, equivalent to instanceof in Java and is in Dart:

isKindOfClass()	Description	Exemple
InvalidTokenReason	The token entered is not valid for the corresponding product	Parameterize "test123" as token in the SDK builder
PermissionReason	You are missing some mandatory permission to run the SDK	Start DocumentDetector without camera permission granted
NetworkReason	Internet connection failure	User was without internet during facematch in FaceAuthenticator
ServerReason	When an SDK request receives a status code of failure	In theory, it shouldn't happen. If it does, let us know!
StorageReason	There is no space on the user device's internal storage	When there is no space on the internal storage while capturing the document photo

Examples

Customizing the Layout

You can customize the layout by creating an object of type DocumentDetectorLayout and passing it as a parameter in DocumentDetectorBuilder:

let layout = DocumentDetectorLayout()

layout.changeMaskImages(
    greenMask: UIImage(named: "my_green_mask"),
    whiteMask: UIImage(named: "my_white_mask"),
    redMask: UIImage(named: "my_red_mask"))

layout.changeSoundImages(soundOn: UIImage(named: "my_sound_on_image"),
                        soundOff: UIImage(named: "my_sound_off_image"))
                        
layout.closeImage = UIImage(named: "my_close_image")
layout.buttonSize = CGFloat(50)
layout.buttonContentMode = .scaleAspectFill

layout.setFont = UIImage(named: "my_font")

let documentDetectorConfiguration = DocumentDetectorBuilder(apiToken: "API_TOKEN")
    .setDocumentDetectorFlow(flow: DocumentDetectorBuilder.RG_FLOW)
    .setLayout(layout: layout)
    .build()

How to get the URL of an audio

let bundle = Bundle.init(for: type(of: self))
let audioURL = URL(fileURLWithPath: bundle.path(forResource: "my_audio_file", ofType: "mp3")!)